Precision Stamped Components - Factors to Consider When Designing Components
Thursday, February 11, 2010 at 12:51PM By Rick Pollick
Certain product design considerations are critical to the success of a precision stamped component. Attention to these factors can contribute to the ease of manufacturability of precision stamped components, and ultimately help to minimize the final manufactured cost. The following three key design considerations will go a long way in helping to ensure manufacturing success. These factors consist of attention to: (1) material selection, (2) part geometry, and (3) intended secondary operations. A company that is well versed in designing precision stamping dies should be able to provide early design-for-manufacturability assistance in addressing these design issues.
First, the selection of material to be used plays a prominent role in the success of manufacturing a precision stamped component. For example, the hardness of a material is directly proportional to the formability of the component. Other factors to consider pertain to the thickness of the material being stamped, and also the grain direction. These two parameters are related to formability, the integrity of small thin features on the component, and spring-back scenarios. Lastly, other material factors to be considered include the flatness, finish, and abrasiveness of the raw material to be stamped. Each of these plays an important role in the success of producing a quality precision stamped component.
A second key consideration for a precision stamped component is related to part geometry. The size of holes, especially as they relate to material thickness, is critical to component integrity. Bent features must be carefully designed, taking into account the proximity of other features (such as holes), and also the fact that a degree of spring-back must be accounted for in the stamping process. Other areas of concern (which can be accounted for if there is an early working relationship between the component designer and the stamping die designer) involve planning for features that involve drawing or coining the material. Lastly, geometry issues pertaining to trimmed features, acceptable burr size, and part cutoff design need to be taken into account.
The third design consideration arises out of a concern for attention to intended secondary operations. Heat-treating stamped components is an option for ferrous components. Tumbling may be performed in order to remove certain surface effects, such as burrs and tool marks; however, care must be taken so as to not deform the part geometry. Other secondary operations may be performed on precision stamped components such as passivation or electro-plating. Some tool designers are capable of incorporating secondary assembly operations so that these are performed inside the stamping die during the stamping operation. In-die assembly and in-die welding are two possible operations that can eliminate separate assembly steps (after stamping), and thus effectively mitigate costs.
In short, this brief introduction to design considerations for precision stamped components is intended to spark more deliberate discussions between the component designer and the designer of the precision stamping die. There are other considerations that may need to be discussed, but these are some of the more common design issues that should be addressed.
Written by Rick Pollick. Rick Pollick is the Manager of Strategic Marketing at Penn United Technologies, Inc. in Cabot, PA. Penn United serves the following markets: Energy, Medical, Defense, and other markets requiring precision components. Penn United provides...Manufacturing Solutions. Absolute Integrity. http://www.PennUnited.com
Article Source: http://EzineArticles.com/?expert=Rick_Pollick
NOTICE - All Rights Reserved Except as Stipulated Below. PHOTOS MAY NOT BE REPRODUCED IN ANY FORM. Our reporters and journalists break or report stories and their sources and information are protected by the doctrine of free press as expressed in the First Ammendment, Reporters Privilege Statues, and also the Canadian Charter of Rights and Freedoms.This article if a feature or opinion piece is the opinion of the author or reports the news and opinions of others and is NOT INTENDED TO OFFER ADVICE. FOR OPINION STORIES: This story/article/ feature may be an opinion piece — and should be treated accordingly — or reporting on the opinions of others, and should never be considered as a sole source of information or as a suggestion, instruction or prescription. FOR CRIME STORIES: always read the word "allegedly" in any story mentioning "suspects" or "persons of interest". FOR BUSINESSS AND MONEY STORIES: For money/ trade and exchange stories, this magazine and its writers accept no responsibility for accuracy — always check with other sources for important decisions. FOR HEALTH AND LIFESTYLE STORIES: In the case of food/health stories, these facts have not been evaluated by the United States Food and Drug Administration (FDA). Information stated here should be NOT be considered as medical, health, psychological or behavior advice. All information in this story and on this site is provided for educational or entertainment purposes ONLY. Always seek the advice of experts, including doctors for medical opinions. Only a licensed medical doctor can offer medical advice. FOR EXPERT, ADVICE OR HOW-TO STORIES: Legal advice or other expert advice is best referred to experts in their respective fields. NO RESPONSIBILITY: The publishers and editors, authors, researchers, employees, heirs and assigns accept no responsibility whatsoever for any advice, facts, opinions in this story, nor for resulting actions of readers of this information. ALL READERS ACCEPT THAT THIS INFORMATION IS PRESENTED ONLY AS NEWS, EDUCATION, ENTERTAINMENT OR OPINION/INFORMATION AND AGREE IN READING THIS STORY OR THIS SITE THAT USE OF THIS INFORMATION IS SOLELY THE RESPONSIBILITY OF THE READER. Copyright by the byline author unless otherwise indicated. EXCERPTS from other magazines or media sources are posted under fair use doctrine, on the basis of no more than 5-10% of content with links and credit to source for the complete story. These are posted in the interest of providing interesting links (description as excerpt) with navigation to the source. Likewise, we encourage our many subscribers to excerpt with credit and links to our e-zines, up to 10% of content. To use more content than 10%, please contact the e-zine for permission. ALL RIGHTS RESERVED except as stipulated herein. IMPORTANT: this web content also includes a forum and comments function, which allows for posting from users not employed by this publication. We accept no responsibility for posts, content, language or accuracy of posts from outside parties but will attempt to correct any inaccuracies reported within the context of free speach. Where possible, spam, lewd or obscene comments WILL BE REMOVED.
Persona Corp. and Blogertize publishes several webzines, magazines, e-zines for news, entertainment and information, but cautions readers to read the NOTICE above:
* Secure Network News
Sponsored Advertisers
Jameson Bank – Canada's "It's Taken Care Of" Bank
Amer.com – Technology for Life
Reader Comments